Post # 204

Standard 555ICs create a significant glitch on the supply when their O/P changes state.Solution:100uF capacitor-across +Vs & 0V,near 555IC.

Post # 203

In general, PWM wave form can be generated by comparing DC input voltage signal with fixed Triangular wave form.

Post # 202

With IAP(In Application Programming)you can only program the memory sections of the controller.Program will keep executing while updating.

Post # 202

With ISP (In system Programming) the entire controller can be erased or programmed. program couldn't get executed while programming.

Post # 201

Silicon Carbide Diode:Ultra low power loss, Ultra fast switching Behaviour, No tempearature influence on switching, Very Expensive

Post # 200

Bootloader can also be known as a source code program.

Post # 199

Bootloader is a piece of code that runs before any operating system is running in Embedded systems.

Post # 198

(contd.)…For example, a pad size of 30 mils and a drill size of 18 mils is commonly referred to as an 18C30 via (the C means circular).

Post # 197

In PCB Designing Via size is defined as a pad size and a drill size….(contd.)